Detailed explanation of the surface condition of titanium plates: multiple options to meet different application needs
2025,07,28
Titanium plates can have different surface states, depending on the requirements of production and processing and the needs of the application. The following is a detailed introduction to the surface conditions of some common titanium plates:
1. Hot rolled surface: Hot rolling is a common titanium plate manufacturing method. Hot rolled plates usually have a rough surface and require subsequent processing and surface treatment to meet specific requirements.
2. Cold rolling surface: Cold rolling is rolling titanium plates at room temperature to obtain a smoother and more uniform surface quality. Cold rolled plate usually has a smoother surface and is suitable for some applications that require higher surface quality.
3. Pickling surface: Pickling is a surface treatment method that can remove oxides, dirt and bad surface layers on the surface of titanium plates, thereby improving the appearance and corrosion resistance of titanium plates.
4. Polished surface: Polishing is the mechanical or chemical treatment of the surface of titanium plates to give it a highly smooth and reflective appearance. Polished surfaces are often used in applications where a refined appearance is required.
5. Sandblasting surface: Sandblasting is to obtain a uniform rough surface by spraying sand particles on the surface of titanium plates to increase surface friction and wear resistance. This type of surface is often used in applications that require slip resistance or increased surface roughness.
6. Anodized surface: Anodizing is a surface treatment method that can form an oxide layer on the surface of titanium plates to improve its corrosion resistance and hardness. This treatment is commonly used in some specific electronic and chemical applications.
Each surface state has different properties and areas of application. Selecting the appropriate surface condition depends on your specific needs, such as appearance, corrosion resistance, friction properties and assembly requirements. Before purchasing titanium plates, it is recommended to discuss your needs in detail with the material supplier or manufacturer to ensure the most suitable surface condition is selected.
